镇江INA轴承在存放过程中会受到环境的影响或者在结晶的工作中会产生生锈的效果，而在我们手中会产生生锈的汗水，因此我们的轴承不容易暴露在车身、包装和存放中，所以我们必须做好防锈步骤。
Zhenjiang INA bearings will be affected by the environment in the process of storage or in the crystallization of the work will produce rust effect, and in our hands will produce rust sweat, so our bearings are not easy to expose to the car body, packaging and storage, so we must do a good job of rust prevention steps.
440是镇江INA轴承中常用的不锈钢。它的强度足以承载重量（比黄铜钢低20%），但防锈性足以承受250C瞬时温度和300C连续温度。盐、酸和碱。316级具有良好的抗锈性，无磁性，但轻载轻载。因为它不强，不准确，感觉粗糙。
The 440 is the stainless steel commonly used in Zhenjiang INA bearings. It is strong enough to carry weight (20% lower than brass steel), but rust resistant enough to withstand 250C instantaneous temperature and 300C continuous temperature. Salt, acid and alkali. The 316 grade has good rust resistance, no magnetism, but light load and light load. Because it is not strong, inaccurate, and feels rough.
轴承
Bearing
因此，在选择防锈材料时，根据性能试验中的质量要求，根据试验中的操作要求和工艺要求，选择合适的防锈材料。它可以大量使用。选用优良的防锈辅助材料，加工厂可根据不同的材料进行质量检测，可用来提供局部分布的后轴承。使用常规防锈材料对溶液进行测试，并确保溶液的浓度和比例满足制备过程中的工艺要求和性能。建立了完整的材料验收体系和质量验收标准，为镇江INA轴承腐蚀提供了可靠的保证。
Therefore, in the selection of anti-rust materials, according to the quality requirements in the performance test, according to the operation requirements and process requirements in the test, choose the appropriate anti-rust materials. It can be used in large quantities. Selection of good rust-proof auxiliary materials, processing plants can be based on different materials for quality testing, can be used to provide local distribution of rear bearings. The solution was tested with conventional antirust materials to ensure that the concentration and proportion of the solution met the technological requirements and performance in the preparation process. A complete material acceptance system and quality acceptance standard were established, which provided a reliable guarantee for the corrosion of Zhenjiang INA bearing.
1。主轴轴承在运行中，要保证足够的润滑，并根据实际情况定期使用润滑油，不能长时间停油。因此，对于用户企业来说，应该选择更好、更合适的锭子润滑剂。新型主轴油能显著提高轴承和主轴的润滑性能，延长旗杆的使用寿命，延长镇江INA轴承和主轴的使用寿命，并具有良好的耐腐蚀性能。
1. Spindle bearings in operation, to ensure adequate lubrication, and according to the actual situation of regular use of lubricant, can not stop oil for a long time. Therefore, for user enterprises, better and more suitable spindle lubricants should be selected. The new spindle oil can remarkably improve the lubrication performance of bearing and spindle, prolong the service life of flagpole, prolong the service life of Zhenjiang INA bearing and spindle, and has good corrosion resistance.
2。对于尼龙轴承，轴承应在低于120度的温度下使用，严禁油。
2. For nylon bearings, bearings should be used at temperatures below 120 degrees, and oil is strictly prohibited.
三。应注意主轴维护和清洗方法，防止损坏和划伤滚轮表面。尽可能去除轴承零件的残留物。应采用冲洗法，锭脚应大于内清洗油。应注意避免因噪音问题、轴承磨损和撕裂失效而造成的清洗残留物在轴承部件中积聚和倾倒。
Three. Attention should be paid to spindle maintenance and cleaning methods to prevent damage and scratch the surface of the roller. Remove residue from bearing parts as far as possible. The flushing method should be adopted and the spindle foot should be larger than the inner cleaning oil. Care should be taken to avoid the accumulation and dumping of cleaning residues in bearing parts due to noise problems, bearing wear and tear failure.
文章来自：镇江SKF轴承 www.wh-skf.com
The article is from: Zhenjiang SKF bearing www.wh-skf.com
文章来自：镇江INA轴承 www.ina-china.cn
The article is from: Zhenjiang INA bearing www.ina-china.cn
文章来自：镇江NSK轴承 www.klbbearings.com
The article is from: Zhenjiang NSK bearing www.klbbearings.com
QQ：524085168
电话：0510-81207777
手机：13311666672
