国际经济复苏后，五金配件泰州SKF轴承在出口市场迎来了发展的黄金时期，在发展中国家尤其如此。由于机械加工业的相对滞后和总体老化，发展中国家对进口五金产品的需求普遍强劲。五金商家抓住这个大好机会，通过贸易协定和交易，逐步开拓了巨大的出口市场和贸易业务。罗百辉建议，五金外贸企业要及时应对形势，积极参与国际展览会，提高产品质量，加大产品创新，积极创造符合国际欧共体的低碳产品。社区。社区。社区。基本情况。了解欧盟指令的硬件产品出口标准，以拓展国外市场。中国五金制品的国际市场占有率。
After the recovery of the international economy, Taizhou SKF bearing, a hardware accessory, ushered in a golden period of development in the export market, especially in developing countries. Due to the relative lag and overall aging of the mechanical processing industry, the demand for imported hardware products in developing countries is generally strong. Hardware merchants seize this great opportunity to gradually open up a huge export market and trade business through trade agreements and transactions. Luo Baihui suggested that hardware foreign trade enterprises should respond to the situation in a timely manner, actively participate in international exhibitions, improve product quality, increase product innovation, and actively create low-carbon products in line with the international European Community. Community. Community. Community. Basic situation. Understand the export standards of hardware products of EU directive, so as to expand the foreign market. The international market share of Chinese hardware products.
1。泰州SKF轴承各种机械伤痕，如磨损、划伤、断裂、划伤等，都会导致轴承安装不顺畅，造成偏心载荷和应力集中，导致旋转精度和使用寿命降低。
1. All kinds of mechanical scars of SKF bearing in Taizhou, such as wear, scratch, fracture, scratch, etc., will lead to the installation of bearing not smooth, resulting in eccentric load and stress concentration, leading to the reduction of rotational accuracy and service life.
2。腐蚀、黑皮肤和点蚀是容易储存水分和污垢的缺点，并且很有可能发展成腐蚀。腐蚀是污染的根本原因，导致安装不顺畅、早期磨损和疲劳。严重的腐蚀导致废物的产生。
2. Corrosion, black skin and pitting are the shortcomings of easy storage of moisture and dirt, and are likely to develop into corrosion. Corrosion is the fundamental cause of pollution, resulting in poor installation, early wear and fatigue. Serious corrosion leads to the production of waste.
三。各种裂纹，如原材料裂纹、锻造裂纹、热处理裂纹和磨削裂纹，将成为今后轴承运行中应力集中和快速膨胀的来源，导致轴承断裂，对泰州SKF轴承的寿命和寿命产生重大影响。轴承。轴承。轴承。轴承的稳定性。很好。事实上，轴承厂为了重要目的进行了多次磁或射线检查。
Three. All kinds of cracks, such as raw material cracks, forging cracks, heat treatment cracks and grinding cracks, will become the source of stress concentration and rapid expansion in the future operation of bearings, leading to bearing fracture, which will have a significant impact on the life and life of SKF bearings in Taizhou. Bearing. Bearing. Bearing. Stability of bearing. Very good. In fact, the bearing factory has carried out many magnetic or radiographic examinations for important purposes.
4。当剥离和折叠时，这两个缺点没有牢固地集成到母材中，并且它们周围有不同程度的脱碳或碳消耗。材料容易出现塌陷、凹陷或磨损，严重影响轴承的使用寿命和精度。
4. When peeling and folding, these two shortcomings are not firmly integrated into the base metal, and there are varying degrees of decarbonization or carbon consumption around them. Materials are prone to collapse, sag or wear, which seriously affect the service life and accuracy of bearings.
5。保持架的铆接或**质量主要观察泰州SKF轴承铆头是否偏移、歪斜、**、缺少肉眼或肉眼、**位置是否正确、**接头是否过大或过小、**强度是否过强或过大。EADS滚动干扰。
5. The riveting or ** quality of cage mainly observes whether the rivet head of Taizhou SKF bearing is offset, skewed, **, lack of naked eye or naked eye, ** position is correct, ** joint is too large or too small, ** strength is too strong or too large. EADS rolling interference.
上述项目是中国进口轴承检验的重要组成部分。除上述部分外，如果打字质量不好，如果笔迹模糊或损坏，应视为次品，如果情况严重，则不能接受。
The above items are an important part of the inspection of imported bearings in China. Except for the above parts, if the typing quality is not good, if the handwriting is blurred or damaged, it should be regarded as inferior, if the situation is serious, it can not be accepted.
它的危害是相当严重的。一些国有企业的泰州SKF轴承质量一般比较好，但由于成本高，在竞争中处于劣势。然而，一些穷国甚至穷国正在以低价竞买国家利益。当前，有必要进一步规范市场，**公平竞争，提高电气零部件外贸市场的竞争力。真的很繁荣。
Its harm is quite serious. Taizhou SKF bearings of some state-owned enterprises are generally of good quality, but they are at a disadvantage in competition because of their high cost. However, some poor countries and even poor countries are bidding for national interests at a low price. At present, it is necessary to further standardize the market and ** compete fairly to improve the competitiveness of the foreign trade market of electrical components. It's really prosperous.
文章来自：泰州SKF轴承 www.wh-skf.com
The article is from: Taizhou SKF bearing www.wh-skf.com
文章来自：泰州INA轴承 www.ina-china.cn
The article is from: Taizhou INA bearing www.ina-china.cn
文章来自：泰州NSK轴承 www.klbbearings.com
The article is from: Taizhou NSK bearing www.klbbearings.com
QQ：524085168
电话：0510-81207777
手机：13311666672/13395185757
