恒旺供应履带式螺旋打桩机 履带底盘 打桩效率高 工程桩孔机械
主要特点
打桩速度快，平均3分钟可实现打桩6米深，即3分钟可打一个孔。
用油省，是普通打桩机用油量的一半左右，一年即可为您省下一台打桩机钱。
钻头采用锰钢制造，经过特殊加工处理，适用于各种地质环境。
履带或轮式行走，行走和爬坡能力强。
车架可前后移动，钻头可左右调节，打桩定位准确。
The
main features
Pile driving speed, the average 3 minutes can
realize piling 6 meters deep, namely a hole three minutes to play.
Oil province, is a common driver USES around
half of a year to save the expense of a driver for you.
Bit using manganese steel manufacturing,
through special processing, are suitable for all kinds of geological
environment.
Tracked or wheeled walking, walking and
climbing ability.
, the frame can be moved back and forth around
bit can be adjust, piling positioning accuracy.
|
额定功率Rated power |
55KW |
|
额定转速Rated speed |
2400r/min |
|
启动电压Start the voltage |
24V |
|
外形尺寸（长*宽*高）Overall dimensions (length * width * height) |
4370*2010*4290 mm |
|
最小离地间隙The minimum clearance from the ground |
380mm |
|
履带板宽度Track width |
260mm |
|
立杆高度Stud height |
4370mm |
|
钻孔直径The hole diameter |
130--800mm |
|
最大钻孔深度Maximum drilling depth |
3600mm |
|
钻杆转速DPR |
71r/min |
|
主泵型号The main pump type |
CBG1-F032/032 |
|
主泵钻速Main pump drilling rate |
2000-2400L/min |
|
主泵压力Main pump pressure |
20Mpa |
|
主阀流量The main valve flow |
100L/min |
|
液压油箱容积The hydraulic oil tank volume |
200L |
|
爬坡度gradability |
35° |
|
最大行驶速度Maximum speed |
5KW/h |
